How do I set up my DSL FRITZ!Box with Teleboy?

You can find instructions for setting up your FRITZ!Box at https://www.teleboy.ch/setup

What to do in case of problems or a red info LED?

If you encounter difficulties during installation or if the red info light on the FRITZ!Box is permanently lit, please check the following:

1. Connect to the FRITZ!Box

• It is best to connect your computer to the FRITZ!Box using a LAN cable (yellow).
• Alternatively, a WLAN connection is also possible.

2. Open the user interface

• Open a web browser (e.g. Firefox, Safari, Chrome).
• Enter the following in the address line: http://fritz.box (without www)

3. Log in to the FRITZ!Box

• You can find the login details for the user interface on the bottom of the FRITZ!Box.
• Attention: These data differ from the WLAN password (network key/WPA2).

4. Set up access data

• In the menu, go to “Internet” → “Access data”
• Select as provider: “Other Internet provider”
• Enter your personal access data (username and password from the order confirmation)

5. Additional settings

• Connection type: PPPoE
• VLAN ID: 10
• Annex: Annex A (only necessary for DSL)

6. Save and test

• Click on “Apply”
• Wait a moment while the FRITZ!Box tests the Internet connection.
• The connection has been successful if the info LED is lit up green.

Connection & settings

Connect the FRITZ!Box directly to the telephone socket using the DSL cable.